The way to Remove mark on glass

The mark will be left on a glass surface after suction, because of the frictional static. Except steam it with hot air, you cannot find it when process. Remove that mark is very hard, wipe and washing machine are not works very well.

That’simportant for LOW-E glass, electronic glass, screen printing glass, high-grade insulating glass... But we still not find a better way to remove that mark. Luckily, a way to avoid that was found-- Suction cups' protective cover. 

The cover made by imported fabrics with adsorption, tightness is good, so please don’t worry about glass will be fell (the load bearing of suction cups will be relatively reduced, about 2%~10%, please choose bearing heavy type). 

You can see that’s very easy to change the cover from the picture.

So this is our way for glass mark if you have other good ideas, welcome to share.

Sophia Liu

Email:kairuiqi@163.com