The installation of waterjet nozzles and waterjet orifices

How to install the waterjet nozzles and waterjet orifices after we get them?Let's explain the considerations and operation methods in detail.

1, First of all, it is necessary to ensure that the working surface of the orifice seat and the jacket of the waterjet mixing tube is clean and without dust.

2, Install the orifice to test the straight line of the water column, and then install the waterjet mixing tube;

3, Test with low pressure water without sand , until the ejected water column is in a straight line without scattering, proving that the waterjet nozzle and the waterjet orifice are absolutely concentric then add sand and pressing for normal cutting.If the jet of water does not appear in a straight line,then need to re-install, twist, or replace the orifies.

4, After every 10-20 hours of using the waterjet nozzles, please rotate it to 120 degrees.

The above operation can ensure the service life of waterjet focusing tube to a large extent.The installation method of waterjet focusing tube an waterjet orifices is not so difficult. If the waterjet spare parts are damaged, you can buy from us and replace them by ourselves. This will reduce unnecessary on-site costs for you . To know know waterjet cutting spare parts? Pls CONTACT US right now! Foshan HaiRan Waterjet Spare Parts Team will offer you the professinal waterjet cutting spare parts service.