two component sealant extrude machine GT01

 Sealant extruder machine GT01(hydraulic and pneumatic drive)

Main Technique Parameter

Mixing rate: 6:1-14:1

A sealant: 55 Gallon (200L)

B sealant: 5Gallon (20L)

Air consumption: 0.5 m3/min.

Sealant pressure: 20Mpa

Air pressure: 0.5-0.8Mpa

Dimension: 1200X1100X2500mm

Weight: 600kg

Machine Introduction

GT01 high-efficiency sealant spreading machine is produced with the most advanced domestic and international technologies, which is applicable to seal insulating glass and curtain wall glass as well as machinery manufacturing. Component A pump and Component B pump are driven by hydraulic and pneumatic systems respectively. With the contact-free electrical control system, a reliable and sensitive switching of direction is realized. The key functional parts are made of high-tension and quality stainless steel with thermal treatment, the reliability and durability of the machine are greatly improved, ensuring a fairly well quality of machine.

The curing agent system of GT01 high-efficiency sealant spreading machine is fully closed, which prevents the sealant from contacting air and therefore solidification occurs. The fluid flow rate stability is ensured and mixing effect improved.

The material pump, curing agent pump and proportional pump high pressure valve of the machine are made of special leakage-free alloy by grinding. The proportional pump is installed with an adjustable proportioning mechanism; the nearly fastidious proportioning requirements of the bi-component adhesive are fulfilled, as well as those of curtain wall glass and insulating glass.

The internationally stationary reciprocating mixer is used in this machine, with the specially designed needle valve, a much better mixing result is achieved.