4mm 5 mm 6mm louver glass

Generally divided into the following TYPE 10, 15, 24, double TYPE insulating glass shutter TYPE

The characteristics of the hollow glass shutter

1, 6 + 12 a + 6 mm double insulating glass

2, leaf width up to 300 mm

3, according to the width of blade differences, vary in length, up to 1800 mm

4, the standard of blade length: width = 1:6

5, control mode: manual, electric

 Louver glass applications:

Glass shutters is with glass as the raw material as the shutter blades, thereby increasing pervious to light performance a shutter. General use in the community, schools, places of entertainment, office, upscale clubs, etc

 Feature :

1And the guiding role of the wind. The appropriate shutter opening Angle, makes the building won't be affected by the outdoor wind, keep proper ventilation.

2, save a space. (the rotation of the shutter open means, decided in the condition of certain ventilation rate, requires very little space);

3, the safety performance.

Multiple of 4, control test: fixed, manual, mechanical transmission, electric motor (external or internal), fire linkage, remote control;

5, decorative. Leaf blade can choose a variety of colors and materials;

6, doors and Windows have a variety of combination way (horizontal pushing, flat open, folding, etc.)

 Measuring the outer frame size:

1, the width of the measurement of the width of the window frame from left to right, the size of the window, middle and under the widest, is the casing outside the suitable width.

2, height measured from the top to the bottom of the window frame height, the largest size left, middle and right, the window is [1] of the casing outside the branch height.

Inside casing size measured in:

1, use the same method of measuring frame size.

2, determine the depth of the window shutter blade enough free activities, different shutter installation window depth is not the same.

3, fixed or flat open 8 cm depth required during installation.

4, push-pull installed in addition to consider product leaf width also consider installing products layers.

5, usually two layers of push and pull to ensure the blade activities need to be 15 cm depth, single fan need 10 cm depth; Folding installation need to reserve a 10 cm depth.