7 mm decorative glass

 

Flat Tempered Glass/Toughened Glass pass test :

 

ANSIZ97.1 EN12150 EN14428 BS6206 AS/NZ2208

 

Production Introduction:

 

HUAHUI GLASS (CHINA) CO.,LTD :Flat/Bent TEMPERED GLASS is made by heating flat glass to just below its softening

 

temperature (650 °c) and suddenly chilling it with jets of cold air. It results in the outer skins under powerful compressive

 

stress and the interior with severe tensile stress. In consequence, the impact applied to the glass will be overcome by the

 

compressive stress on the surfaces to assure safety of use. It is ideal for areas with high wind loads and areas where

 

human contacts are an important consideration.

 

Features

 

--Safety: It will usually shatter into small fragments instead of sharp shards when broken, making it less

 

likely to cause severe injury and deep lacerations.

 

--High Strength:Toughened glass is typically four to six times the strength of annealed glass.

 

Applications:

 

--It is used when strength, thermal resistance and safety are important considerations

 

--In commercial structures it is used in unframed assemblies such as frameless doors, structurally loaded applications.

 

--Used in a variety of demanding applications, including passenger vehicle windows, glass doors and tables, refrigerator trays,

 

as a component of bulletproof glass, for diving masks, and various types of plates and cookware.

 

SPECIFICATION:

 

Glass Types:	Float Glass, Pattern Glass
Colors:	Clear, Extra Clear, Bronze, Grey, Blue and Green etc
Thickness:	3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm
Size:	Max. 2440x3600mm, Min.250x250mm