Second suntech drilling machine

Drilling Machine

The pneumatic clamp is used in the glass, and the upper and lower drill bits are drilled successively. Automatically feeding, working table liftin. Available size is wide. (SZ0222A is automatic.)

Technical parameters:

1:Model- SZ0222 

2: Drilling Diameters: Φ4-Φ220mm

3: Thickness of Glass: 3-20mm

4: Voltage: 380v/3p

5: Processing size: 2600mm*1800mm

6: Dimension: 2600*2600*1700mm

7: Total Power: 3KW

8: Frequency: 50H2

9: Moving Speed of Axis: 350-3000r/min  

10.Gross Weight: 100kg

Information about engraving machine: Dedicated to engraving patterns or characteristics on glass. Table is covered with rubber, equipped with the vacuum system, which could fast locate the glass without other devices; putting glass on the table, the equipment finishing patterns or writings on surface of glass. It includes rough carving, fine carving, polishing, etc.

Advantages:

1. The equipment specific software design is perfect, the operation is simple, easy to learn and easy to understand. The people having a little training on the basis of junior high school culture

can operate.

2. High processing efficiency, fast transmission, the fastest empty car speed is up to 75/min, leading in the same industry

3. The processing cost is low, the cutter wheel can be from (170-110) mm, and then the optimizing cutting speed minimizes the consumption of the tool.

4. The operating interface of the system uses Chinese button; and the man-machine conversation function is improved, and it only needs the least equipment which could be normal processing. 5 Hand tool, the Z axis would reposition when every change of the thickness of the glass; a person could do independently through hand wheel gently shaking.