Home > Products > Flat Glass > Water-based Glass Frosting Powder

Water-based Glass Frosting Powder

For Price Order(): Negotiable

Category:
Flat Glass/Flat Glass
Price:
Negotiate
Sample:
No
Trade Terms:
FOB,CIF
Payment Terms:
L/C,T/T,Western Union
Package:
None
Post Date:
2016/12/16

Product Details

Mohs rating

13
OEM

23

ST-106 frosting powder is only mixed with water without adding any acid during the frosting process and provides a more environmental friendly solution.

1.Water soluble, environment-friendly system.

2.Available for sodium lime glass.

3.Frosting time: 2-4 minutes ( at 25-40鈩?/span>).

4.3-4 m²/kg frosting capacity.

5.Two major compositions inside ( part A and part B ).

6.Package: 25 kg/plastic bag.

7.Validity: 2 years.

8.Mixed weight ratio = 1 : 0.40 (the powder to water ).

For comparison,ST-101 and ST-106 powders are liasted in the following table:

PropertyST-106(with water) ST-101(with Hydrochloric Acid) Mixed ratio 1:0.40 1:0.50 Maturation time 2-3 days 1-2 days Frosting time2-4 mins 15-60 secs Frosting temperature 25-40鈩?nbsp;15-35鈩?nbsp;Frosting capacity 3-4 m2/kg 8-10 m2/kg

Frosting Operation:

1. Preparation

Frosting powder, PVC or plastic containers, rubber gloves and safety glasses.

2.Frosting Solution Preparation

Put the powder in a PVC container.

Add water into the container.

Cover the mixed solution 1-2 days for maturation, stir two times per day.

3. Frosting Operation

(1) Stir the solution well with a wood or plastic rod.

(2) Pre-treat glass surface with diluted HCl acid (5-10%), wash the glass with

water.

(3) Dip the glass into the frosting solution or spray frosting solution on the glass

surface.Glass frosting time varies with frosting solution鈥檚 concentration and

temperature.

(4) Drip the glass for 10-25 seconds and wash with water.

4.Drying

Dry the glass with hot air.

5.Frosting Solution Refills

The concentration of the frosting solution will decrease after frosting a few hours.Additional concentrated frosting solution (1:0.30 or 1:0.40) should be added into the frosting working system to maintain normal production.

6.Treatment of Waste Water

During frosting operation, acidic waste water needs to be neutralized with lime water.

7. Safety Notes

(1) Wear safety glasses and rubber gloves at all times during both the frosting

preparation and operation.

(2) Carry out frosting operation in a ventilated room.

(3) In case of contacting with skin or eyes, wash immediately with running water for 5
-15 minutes. Then seek medical attention if discomfort still persists.

Note:
1.After frosting thousand pieces of glass bottles,refill matured concentrated solution(1;0.30).
2.Hot water(at 70-80鈩?/span>) is a better choice.