tempered glass doors

Tempered glass doors

Description:

Tempered glass

The tempered glass is made by heating ordinary glass to its softening point and then suddenly cooling down to form compression in the surface layer of the glass, which processing make full tempered glass above 4 times stronger than annealed glass of equal thickness.
Characteristics 
Safety: once breakage occurs, the glass disintegrates into tiny harmless pieces
High strength: above 4 times stronger than annealed glass of equal thickness
Strong wind resistance: 1.5-3 times stronger than annealed glass of equal thickness
Excellence thermal stability, which can withstand 300ºC abrupt change of temperature
Types
Tempered glass, Heat strengthened glass, Tempered glass with hest soak, Bent tempered glass
Thickness
3- 19mm, etc.
Colors 
Clear, Ultra Clear, French Green, Dark Green, Euro Grey, Dark Grey, Ford Blue, Dark Blue, Ocean Blue, Euro Bronze, Dark Bronze, Golden, Pink, Yellow, etc.
Or mirror, patterned glass, decorative glass are available tempered.

#Tempered glass is produced by heating annealed glass in a furnace to 620°C. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
#4-5 times stronger than annealed glass of the same thickness.
#Stronger resistance to thermal breakage than annealed or heat strengthened glass
#If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.
#Suitable for use as a safety glass as defined by consumer product safety association 16CFR 1201, ansiz 97.1 1984 and BS6262.
#Conforms to American Standards ASTM C1048. All work done on glass (beveling, cutting, bending, etc) must be done before tempering.
#Ideal for areas with high wind loads and areas where human contacts is an important consideration, Rider's tempered glass is the perfect option for architects who must meeting building codes and safety requirements. Moreover, it is the only glass strong enough to withstand high levels of thermal stress, a common reason for breakage in building facade glazing units (see table below). These safety features also make it an exemplary choice for automotive applications. Guaranteeing quality, We applies heat soak testing to all of its tempered glass before packaging and loading. It is available in all of Yason's standard float thicknesses and sizes.

About SYS Glass

 YASON GLASS COMPANY LIMITED , is a high professional flat glass manufacturer and exporter in China,Our company has over 30 years experience in processing glass. Through 30 years development we have more than 350 staff,with strong technical support and production capacity. We export raw and processing glass to more than 100 countries.