3-19mm Tempered Glass Safetybuilding Glass Glass Laminated Glass Toughened Glass for Furniture Door Window Decorative Showeroom Bathroom

Tempered Glass is flat or curved glass  that  has  been heat-treated  to  induce a high surface  and / or edge  compression.
Fully toughened glass, if broken will fracture into many small pieces (dice) which are more or less cubical. Fully toughened
glass is approximately 4 to 5 times stronger  than annealed glass of  the same  thickness when  exposed to  uniform  static
pressure loads. It is sometimes called Tempered glass.

Tempered /toughened glass is a type of safety glass processed by controlled thermal or chemical treatments to increase
its strength compared with normal glass. Tempering puts the outer surfaces into compression and the inner surfaces into
tension. Such  stresses cause the glass, when broken, to crumble into  small granular chunks  instead of  splintering  into
jagged shards as plate glass (a.k.a. annealed glass) does. The granular chunks are less likely to cause injury.

Properties
Tempered/Toughened glass is physically and thermally stronger than regular glass. The greater contraction of the inner
layer during manufacturing induces compressive stresses in the surface of the glass balanced by tensile stresses in the
ody of the glass.The smaller glass particles will be then broken. Any cutting or grinding must be done prior to tempering.
Cutting, grinding, and sharp impacts after tempering will cause the glass to fracture.

Products specification: Flat tempered glass
Maximum dimension:  3000mm x 2000mm
Minimum dimension: 300*300mm
The thickness of glass: 4-25mm
Color:clear, ultra clear(low iron, crystal clear, star fire), F green, Ford blue, gray, Light Bronze, Deep Bronze, etc.
Products application: Door, window, curtain wall, ceiling, floor, partition wall, roof lighting, show window of the shop and
roof window of factory building. There is extensive application in vehicle, steamer,  bank, jeweler's shop, villa, etc.

Warm reminder:
Considering the characteristics of tempered glass, glass size should be confirmed before making production.
Once tempered glass size is confirmed, tempered glass can not be made mechanical treatment any more,
otherwise, it will be broken. If breakage occurs the glass breaks up into small, cubical fragments, which are
ot threatening to humans.